Rugged Cams ELX DVR 16 Channel - Manual (Page 33)

Basic Configuration ELX16-240
Rugged CCTV.
2003.09.06 (v 1.0) 33
Status
Set “On/Off” using the or buttons after pressing the [ENTER] button.
Type
Just displays the video-input signal. It is set with jumper s witch inside of ELX16 -240.
Color
Set “Color/ B/W” using the or buttons .
AGC (Auto Gain Control)
Set “On/Off” using the or buttons after pressing the [ENTER] button.
Brightness/Contrast
Set the value between –9 and +9 using the or buttons.
Covert
If setting “Covert” as “On ”, channel will be hidden in monitoring mode.
Set “On/Off” using the or buttons after pressing the [ENTER] button.
PTZ Home/PTZ Idle Time
If there is not any movement during "PTZ Idle Time ”, the camera will move to the already desingnated
preset point.
Set the preset number and time with using the or buttons.
PTZ Port
Set the value using the or buttons .
Address
Press the [ENTER] button to open the dialogue box.