Precision Digital PD865 - Manual (Page 36)

PD865 Snooper Modbus Serial Input Meter Instruction Manual
36
Serial Communications (SEriAL)
The meter has an RS-485 interface. The baud rate, parity, and byte-to-
byte timeout can be programmed.
Serial
baud
300 600
Press Enter/Ack to
Make Selections
Press Up Arrow to
Scroll Through
Choices
Press Menu to Exit
at any Time
19200
parity
no even odd
t-byte
Enter byte-to-byte
Timeout Value
Program Menu (Prog)
The Programming menu contains the menus for Display Decimal Point
(diSP.dp), Scale, Relays, and Analog Output (4-20 mA).
Note:
If Float data type has been selected, the program menu also
contains a Float Decimal Point (
FLot.dp ) selection.
prog
diSP.dP scALE relay aout