Connections – Precision Digital PD865 User Manual
Page 16
PD865 Snooper Modbus
Serial Input Meter
Instruction Manual
16
Connections
All connections are made to removable screw terminal connectors
located at the rear of the meter.
!
Caution!
Use copper wire with 60°C or 60/75°C insulation
for all line voltage connections. Observe all
safety regulations. Electrical wiring should be
performed in accordance with all applicable
national, state, and local codes to prevent
damage to the meter and ensure personnel
safety.
Connector Labeling
The connectors’ label, affixed to the meter, shows the location of all
connectors available with requested configuration.
Figure 4: Connector Label: 4 Relays,
4-20 mA Out & 24 V Supply