Precision Digital PD865 - Manual (Page 25)

PD865 Snooper Modbus Serial Input Meter Instruction Manual
25
Display Parameter Action/Setting
Reg.Pv4 PV4
Register Enter the Register Number for PV4.
Reg.Pv5 PV5
Register Enter the Register Number for PV5.
Reg.Pv6
PV6
Register Enter the Register Number for PV6.
Reg.Pv7 PV7
Register Enter the Register Number for PV7.
Reg.Pv8 PV8
Register Enter the Register Number for PV8.
1-reg
1 Register Select 1 register for the assigned PV (short
integer).
2-reg 2 Registers Select 2 registers for the assigned PV (long,
float).
5 dig
6 dig Reg. Numb.
digits Select either 5 (x0001-x9999) or 6 (x00001-
x65536) digits for the Register Number by
pressing the Right arrow in Register Number
menu.
Data.1
Data Type Enter the Data type menu for PV1.
Short Short
Integer Select Short Integer as the data type to be read
from the slave device (PV1).
Long Long
Integer Select Long Integer as the data type to be read
from the slave device (PV1).
Float Floating
Point Select Floating Point as the data type to be read
from the slave device (PV1).
bcd BCD Select BCD format for Short or Long integers.
binary Binary Select Binary format for Short or Long
integers.
unSigd
Unsigned Select Unsigned Binary format for Short or Long
integers.
SignEd Signed Select Signed Binary format for Short or Long
integers.
1234 Byte Order Select big-endian byte order.
4321 Byte Order Select little-endian byte order.