Precision Digital PD865 - Manual (Page 22)

PD865 Snooper Modbus Serial Input Meter Instruction Manual
22
SETUP AND PROGRAMMING
 There is no need to recalibrate the 4-20 mA
output (when installed) as received from the
factory.
 The 4-20 mA output is factory calibrated
prior to shipment. The calibration equipment is
certified to NIST standards.
Overview
There are no jumpers involved in the meter setup procedure.
Setup and programming is done through the front panel buttons.
After power and signal connections have been completed and verified,
apply power to the meter.