Snmp menu, P.87, Network menu – Epson Z8250NL User Manual

Page 87

Text mode
Original mode

Network Menu

SNMP menu

To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be managed by a network
administrator.

Sub Menu

Function

SNMP

Set this parameter to On when using SNMP

to monitor the projector.

Trap IP Address 1/Trap IP
Address 2

When SNMP is set to On, you can set up to two IP addresses as SNMP trap notification destinations.

You can input a number from 0 to 255 in each field of the address.

However, the following IP addresses cannot be used.

127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)

Community Name

Set the community name of SNMP. You can enter up to 32 single-byte alphanumeric characters.

This manual is related to the following products:

Z8450WUNL Z8150NL Z8255NL Z8350WNL Z8455WUNL