Epson Z8250NL - Manual (Page 101)

Problem Solving
101
When the Indicators Provide No Help
If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem.
Problems relating to images
• "No images appear" s p.103
Projection does not start, the projection area is completely black, the
projection area is completely blue, etc.
•
"Moving images are not displayed (only the moving image portion
turns black)."
s p.103
Moving images being projected from a computer appear black and
nothing is projected.
•
"Projection stops automatically" s p.103
• "The message "Not supported" is displayed." s p.104
•
""No Signal" is displayed." s p.104
•
"Images are fuzzy or out of focus" s p.105
• "Interference or distortion appears in images" s p.105
•
"The image is truncated (large) or small, or the aspect is not
suitable"
s p.106
Only part of the image is displayed, or the height and width ratios of
the image are not correct, and so on.
•
"Image colors are not right" s p.106
The whole image appears purplish or greenish, images are black &
white, colors appear dull, etc. (Computer monitors and LCD screens
have different color reproduction performance, so that the colors
projected by the projector and the colors appearing on the monitor
may not necessarily match, but this is not a sign of a problem.)
• "Images appear dark" s p.107