Epson Z8250NL - Manual (Page 161)

Adjusting the Projected Image
161
Adjusting the Position of the Projected Image (Lens
Shift)
The lens can be shifted to adjust the position of the projected image, for
example, when the projector cannot be installed directly in front of the
screen.
Procedure
A
Press the [Lens Shift] button on the remote control. When
using the control panel of the projector, press the [Lens]
button three times.
B
To adjust the position of the projected image, use the [h]
button on the remote control or the [w/
], [v/ ], [</ ],
and [>/ ] buttons on the control panel.
Keep pressing the button to move the image continuously.
When the position of the lens shift comes to the center of the verti-
cal or horizontal direction, it stops moving. Release your finger and
press the button again to adjust more.
q The image will be clearest when both the vertical and horizontal lens shift
are set in the center.
The ranges within which the image can be moved are shown below.
Using the Remote Control Using the Control Panel
Using the Remote Control Using the Control Panel