Epson Z8250NL - Manual (Page 81)

Network Menu
81
Wired LAN Menu
Sub Menu Function
DHCP You can set whether or not (On/Off) to use DHCP g .
If this is set to On you cannot set any static IP addresses.
IP Address You can input the IP address g assigned to the projector.
You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet Mask You can input the Subnet Mask g for the projector. You can input a number from 0 to 255 in each field of the address. However, the
following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address You can input the IP address for the gateway for the projector.
You can input a number from 0 to 255 in each field of the address. However, the following Gateway addresses g cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
IP Address Display To prevent the IP address from being displayed on the LAN Standby screen, set this to Off.