Selecting [standard] to install, Selecting [standard] to install(p. 22), Prerequisites – Canon i-SENSYS MF244dw User Manual
Page 25: Procedure
Selecting [Standard] to Install
This explains the procedure for automatically searching for a device on a network and installing a driver
([Standard]).
Prerequisites
Confirm that the following conditions are satisfied. Complete the preparation operations.
●
System and Service Requirements(P. 15)
●
The device is one that is on the same subnet as the computer you are using (for TCP/IP network
environments)
●
Settings at the device (for network environments that use WSD)
- Set both [Use WSD] and [Multicast Discovery Settings] to on.
- "UFR II," or "PS3" is selected for [PDL Selection (Plug and Play)].
For details, refer to the manual of the device.
●
The device must be in the same subnet as the computer you are using.
●
Installation Preparations and Precautions(P. 17)
●
When starting the computer, log on as a member of Administrators.
●
[Desktop] screen display (when using Windows 8/8.1/Server 2012/Server 2012 R2)
Procedure
1
Start the installer.
If you are using an installer downloaded from the web site
Double-click the downloaded file to decompress it. If the installer does not start automatically after it is
decompressed, double-click [Setup.exe].
If you are using the accompanying CD-ROM
(1) Set the CD-ROM in the computer → click [Installation].
(2) In the [Installation] screen, confirm the driver → click [Installation].
If the CD-ROM menu is not displayed, click "Open details."
In the following procedure, start the installer.
- When the [Tap to choose what happens with this disc.] message is displayed: Click the message → click
[Run MInst.exe].
- When the [AutoPlay] dialog box is displayed: Click [Run MInst.exe].
- When Windows Explorer is displayed: Double-click [MInst.exe].
- When nothing is displayed (Windows10): From Explorer, double-click the CD icon in [This PC] > [Devices
and drives].
- When nothing is displayed (Windows 8/8.1/Server 2012/Server 2012 R2): Click Explorer in the [Desktop]
screen → double-click the CD icon in [Computer].
- When nothing is displayed (Windows Vista/7/Server 2008/Server 2008 R2): Double-click the CD-ROM icon in
[
] (Start) > [Computer].
Installation Using the Installer
22