MCZ Duo HYDRO AIR - Manual (Page 6)

MENU
B
E
OFF
ON
ECO
6
9-FIRST START-UP
OFF-DISPLAY OFF OFF-DISPLAY ACTIVE
SCREEN OFF
If a LANGUAGE has already been set, the display will go to OFF.
Pressing any one of the keys (B, C, D, E) will result in the first screen showing OFF to be displayed. From this screen, pressing keys "B" and
"E" (respectively corresponding to ON and MENU) it is possible to access the panel or the menu. If no key is pressed, the display will once
again show OFF after 5 seconds.
PRELIMINARY OPTIONS
Hydro Air stoves are characterised by the presence of a heating hydraulic circuit and a room air fan for distributing hot air.
The possibility of deviating the hydraulic circuit towards a finned copper exchanger based on user request or automatically to double the
amount of heat distributed to the room air (also see HYDRO AIR SETTINGS MENU).
Room fan
The speed can be set manually or automatically.
In manual mode the speed, from 0 to 5, is chosen by the user from the control panel. The fan is only activated if the air output temperature
exceeds 42°C and is deactivated when it goes below 40°C; while at speed 0 the fan is off.
In automatic the stove adjusts fan speed in order to obtain stable output air temperature (approximately 55°C in Hydro Air On mode and
45°C in Hydro Air Off mode), optimising acoustic comfort with an equal power provided. Even in this case the fan is only activated if air
temperature exceeds 42°C.
For greater comfort, maximum fan speed in automatic mode corresponds to 3 and shuts off only if the temperature falls below 40°C.
AUTO
B
E
EXIT OK
SET VENTILATION
B
E
C
D
EXIT OK
SET VENTILATION