MCZ Duo HYDRO AIR - Manual (Page 11)

11
10-MENU STRUCTURE
Technical Dept. - All rights reserved - Reproduction is prohibited
MANUAL
This function can be activated from the menu PROGRAMME by pressing the key "C" ACTIVE. When this function is activated the stove no
longer follows time programming of TIMER 1 or 2 programmes, but it keeps the temperature set in the main screen throughout the 24
hour time period. It is possible to switch to programmes at any time.
TEMPERATURE LEVELS
It is possible to change the 3 temperature levels referenced by timers in this menu.
From the PROGRAMS menu use arrow key "D" to move and select TEMP LEVELS, press the "E" keys and enter the
temperature settings screen. With the centre arrow keys "C" and "D" increases/decreases the temperature value, while the "B" is used to
move to the next temperature. With the "E" key (OK) the set values are confirmed.
SLEEP FUNCTION
The sleep is only activated when the stove supplies power and makes it possible to programme a stove shut off time. The shut off can be
delayed for a maximum of 8 hours from current time and with a 10 minute resolution.
To activate, enter the PROGRAM menu, scroll using arrow key "D" up to the Function. SLEEP press the ATTIVA (ACTIVATE) "C" key. In the
next screen, using keys "C" and "D", increase or decrease the minutes (10 minutes each time the key is pressed) and press OK ("E" key) to
confirm the stove shut off time.
NOTE: If the stove is not supplying power the display shows the wording "NOT AVAILABLE".
TEMP. LEVELS
OK
T1
T2
T3
16°
20°
22°