MCZ Vivo 90 Pellet Comfort Air - Manual (Page 52)

L
E
50
14-CLEANING
CHECK EVERY 2 / 3 DAYS
Clean and empty any ash or deposits from ash pan “E” and brazier “L” that might obstruct the air flow holes, paying attention to any hot
ashes.
If the pellets in the hopper run out, unburned pellets may accumulate in the brazier. Always empty the residue in the brazier before each
start-up.
You may only use a vacuum cleaner to remove ash when it is completely cold. In this case, use a suitable vacuum cleaner to
remove small sized particles. The quality of the pellets used and user experience will determine the cleaning frequency required.
However, it is recommended not to exceed 2 or 3 days.
CLEANING THE GLASS
It is recommended to clean the ceramic glass with a dry brush, or if it is very dirty, spray a little specific detergent and clean with a cloth.
ATTENTION!
Do not use abrasive products and do not spray the glass cleaning product on the painted parts and on the door
gaskets (ceramic fibre cord).