MCZ Vivo 90 Pellet Comfort Air - Manual (Page 33)

31
7-INSTALLATION AND ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
ELECTRICAL CONNECTION
First connect the power cable to the rear of the product and then to a wall socket, which must always remain accessible.
Should this not be possible, during installation insert suitable devices for disconnection from the power mains, in compliance with
national electrical installation standards.
On the rear of the stove there is a fusebox which is located near the power socket. Open the fusebox cover with a screwdriver and replace
the fuse if necessary (3.15 A delayed) - seek assistance from an authorised and qualified technician.
It is recommended to disconnect the power cable when the product is not in use.