Cleaning, Daily or weekly cleaning performed by the user – MCZ Vivo 90 Pellet Comfort Air User Manual

Page 51

14-CLEANING

ATTENTION!

All the cleaning operations of all parts must be performed with the product completely cold and the plug

disconnected.

The product requires little maintenance if used with certified good quality pellets.

DAILY OR WEEKLY CLEANING PERFORMED BY THE USER

Before each lighting

Clean the ash and any deposits in the brazier that could clog the air passage holes.

If the pellets in the hopper run out, unburned pellets may accumulate in the brazier. Always empty the residue in the brazier before each

start-up.

REMEMBER THAT ONLY A CORRECTLY POSITIONED AND CLEAN BRAZIER CAN GUARANTEE IGNITION AND OPTIMAL

OPERATION OF YOUR PELLET PRODUCT.

For the brazier to be cleaned properly, remove it from its housing completely and thoroughly clean all the holes and the grate on the

bottom. If good quality pellets are used, you will normally only need to use a brush to restore the optimal operating conditions of the

component.

After a long period of inactivity, (using a vacuum cleaner with a long pipe) remove any traces of pellets in the hopper that could have

absorbed moisture and are no longer suitable for combustion.

EXAMPLE OF A CLEAN BRAZIER

EXAMPLE OF A DIRTY BRAZIER