Setting exposure – Epson PhotoPC L-410 User Manual
Page 39
Taking Photos
39
2
2
2
2
2
2
2
2
2
2
E
ngl
is
h
4.
Select the desired sensitivity from Auto, 100, 200, and 400 by using the u d buttons, then
press the OK button.
Setting Exposure
You can adjust exposure to help control how much light falls on the CCD. It influences the
brightness of the entire image. You usually don’t need to make manual adjustments, but it is
possible to increase or decrease the exposure to suit a particular purpose.
It is recommended that these adjustments be used when shooting against the sun or when you
have any very bright background where the automatic sensors may not work well.
1.
Turn the Mode dial to
manual photography mode.
2.
Press the MENU button. The Photography Menu is displayed.
3.
Select Exp Comp by using the u d buttons, then press the r button.
4.
Select the adjustment value by using the u d buttons, then press the OK button.
Note:
The exposure adjustment range is from - 2.0 EV to + 2.0 EV during programmed shooting. There are
9 steps of 0.5 EV each. You can confirm the setting on the LCD monitor.