Epson PhotoPC L-410 - Manual (Page 33)

Taking Photos 33
2
2
2
2
2
2
2
2
2
2
E
ngl
is
h
❏ When using digital magnification, the digital zoom indicator will appear at the right side of the T
bar. When 2
×
on the center, 3
×
on the right side of T.
Controlling the Flash
You can change the flash setting by pressing the Flash button. The flash mode changes each
time you press the Flash button.
Auto-flash (default setting) The camera detects the brightness automatically and sets off
the flash if necessary. In a dark setting, the flash is used
automatically.
Flash off Turns off the flash even in dark settings.
Auto red-eye reduction Use this setting when photographing people with a flash at
night or indoors. The flash will go off once and will go off again
when the photo is taken. This will help to reduce the red-eye
phenomenon.
Fill-in flash The flash will go off no matter the brightness. Use it when the
background is bright or when you are shooting against the sun.
Slow synchro The flash is used combined with a slow shutter speed. By using
the slow synchro, you can take an action photo with a blurred
background.