Epson COLOR Copy Station 8600 - Manual (Page 91)

How To 91
2
2
2
2
2
2
2
2
2
2
2
2
Remote Printer mode:
❏ A NetWare user account is not required.
❏ A print server is needed to control the remote printer.
❏ Can attach up to 16 printers for NetWare 3.x, and up to 255
for NetWare 4.x or later.
Note:
When you turn on the printer, the user account is temporarily accessed
in the Remote Printer mode. If there is no user account available, turn
on the printer before connecting the client to the network.
Standby mode (factory default mode):
The Standby mode is the default mode. This mode disables all
NetWare related functions. Use the Standby mode when you are
not using the network interface in a NetWare environment.
Instructions for using NetWare
Printing a text file
When you print a text file using the NPRINT command of
NetWare or DOS, redirection, misconversion or a gap in
characters may occur depending on the client environment.
IPX routing protocol “NLSP”
It is possible to set the IPX routing protocol “NLSP” from
NetWare 4.x or later; however, the network interface does not
support NLSP. RIP/SAP controls the communication.
You can select the routing protocol from a) NLSP with RIP/SAP
Compatibility, or b) RIP/SAP Only. If you remove the bind of RIP
or SAP when NLSP with RIP/SAP Compatibility is specified, the
network interface then cannot communicate with the file server
and NDS. (See “Protocols” and “Bindings” in NetWare’s
INETCFG utility.)