Epson COLOR Copy Station 8600 - Manual (Page 236)

236 Tips for Administrator
EpsonNet NDPS Gateway
EpsonNet NDPS Gateway is a gateway software that you can use
to print and monitor the printer status of the Epson printer in the
NDPS (Novell Distributed Print Services) environment of
NetWare.
Use the Setup tool of EpsonNet NDPS Gateway to upload the
printer driver to Resource Management Service (RMS). When the
printer driver is installed in RMS, it is automatically installed on
the workstations.
Instructions on Using a Dial-Up Router
This section describes instructions on using a dial-up router.
If DHCP is used to assign an IP address of the printer and the
Dynamic DNS function is not supported, you need to change the
printer port setting every time you turn on the printer. Therefore,
we recommend that you set a valid IP address for the network
interface by using the one of the following methods.
❏ Set the IP address for the network interface manually. Use
EpsonNet Config. See the EpsonNet Config Reference Guide
for details.
❏ Specify the network interface by using the bind of DHCP
function.
❏ Set the exclusive address of the DHCP function.
Note:
❏ Use NetBEUI printing if you do not want to go through these steps.
❏ See the manual of the Dial-Up router for more information on scorp
range, bind, exclusive address of the DHCP function.