Epson COLOR Copy Station 8600 - Manual (Page 118)

118 How To
❏ When the primary server is down during operation
A dial-up is generated because a connection to the primary
server is attempted periodically. Since this is attributable to the
automatic re-connection function, turn off the printer once.
❏ When the file server on the local network is down
When there is no file server on the local network, NetWare
cannot be used on the local network. In this case, the NetWare
protocol for the network interface is also not available. No
dial-up is generated under this condition. When the file server
on the local network is restored, the network interface is also
automatically restored.
For local networks with no file server:
Depending on the router settings, the NetWare protocol can be
used without a file server on a local network. This setup follows
the same pattern as that described above.
Local network
Printer
Dial-up
router
Dial-up
router
Primary file server
(primary print server)
Remote network