Epson COLOR Copy Station 8600 - Manual (Page 106)

106 How To
Configuring for NetWare using EpsonNet Config
1. Turn on your printer.
2. Load the print server from the file server’s system console
which the print queue volume is set.
>LOAD PSERVER print server name you set using
NWAdmin
3. Configure the network interface using EpsonNet Config. See
the EpsonNet Config Reference Guide for details.
If you use the NetWare objects that are already created, you
can use EpsonNet Config with Web Browser too. See
"NetWare" on page 166 for details.
Using the EpsonNet NDPS Gateway
This section contains instructions on printing using Novell
Distributed Print Services
®
(NDPS
®
) with Novell
®
NetWare
®
5.x/6.0. Novell Distributed Print Services (NDPS) is
the new generation print services of NetWare.
Note:
❏ Banners cannot be printed with NDPS.
❏ The Status Monitor 3 utility cannot be used with NDPS.
❏ Bind the IP or both IP or IPX protocols on the NetWare server that
runs NDPSM.NLM and EPSONGW.NLM.
Check the following points before starting.
❏ Install the appropriate client software, such as Novell Client
for Windows 95/98 version 3.4, Novell Client for Windows
NT/2000 version 4.8, or Novell Client for Windows XP
version 4.9 on client workstations. Make sure they install
NDPS.