Epson COLOR Copy Station 8600 - Manual (Page 212)

212 Network Software
Starting EpsonNet WebManager
Be sure that TCP/IP is installed, and the IP address or host name
is set for the computer. (Register the host name in the hosts file in
the Windows directory.)
From the server
To start EpsonNet WebManager, click Start, point to Programs
(for Windows 2000 and NT 4.0 users) or All Programs (for
Windows XP and Server 2003 users), and then select EpsonNet
WebManager. Click EpsonNet WebManager.
For Windows XP Service Pack 2 users:
If EpsonNet WebManager is installed on the computer running
Windows XP Service Pack 2, make the following settings;
otherwise the client computers cannot access EpsonNet
WebManager.
1. Click Start, point to Control Panel, and then select Security
Center. Click Windows Firewall.
2. Click the Exceptions tab, and then click the Add Port button.
3. Enter the name of the port in the Name text box, and 8090 in
the Port number text box, and then select the TCP radio
button.
Note:
If necessary, click the Change scope button, and then specify
the IP addresses of the client computers for which the port is
unblocked.
4. Click OK.