Epson COLOR Copy Station 8600 - Manual (Page 161)

Network Software 161
3
3
3
3
3
3
3
3
3
3
3
3
GL2 Emulation
ESCP2 and FX Emulation
Items Explanations
Emulation Select GL2.
GL-Mode Select whether the emulation is similar to the
GL/2 or the HP LaserJet 4 emulation of the
GL/2.
Scale Select whether the output from the software
is scaled, and if so, how the scale factor is
calculated: based on the output paper size
of the software application.
Origin Select whether the logical origin of the
“plotter” is from the corner or the center of
the paper.
Pen Select the logical “pen” which “plots” the
drawing.
End Select the way in which lines end.
Join Select the way in which lines are joined.
Pen (0 to 6) Select the thickness of the seven “pens”
used to make the printout.
Set button Saves any changes.
Refresh button Clears any changes and reloads the
previous settings.
Items Explanations
Emulation Select ESCP2 or FX.
Font Select a font which is used for printing.
Pitch Select a character pitch.
Condensed Use this option to change the character
spacing.
T. Margin Use this option to specify the distance from
the top of the sheet to the baseline of the first
printable line.