Powerfix Z31712A/Z31712B Z31712C/Z31712D - Manual (Page 12)

12 GB/IE
Mounting
Select a suitable place for installation
Ensure that
– the motion detector will not be functionally inhibited at the desired
place of installation due to obstacles or constantly moving objects.
– the motion detector is not installed where there are strong temperature
fluctuations, e.g. due to heating devices or air conditioners.
Installation
DANGER TO LIFE BY ELECTRIC SHOCK! Before
installation, switch off the electrical circuit at the circuit breaker box or
remove the fuse from the fuse box.
Note: The recommended installation height is between 1.8 and 2.5 m.
Note: Before installation, ensure an optimal direction of motion. The
motion detector reacts more sensitively to movement from the side than
to motion from the front (see Ill. A). Therefore, we recommend installing
the motion detector
1 to the side of the direction of movement.
Note: To attach the base plate 4 it is necessary to drill two holes.
Ensure that you do not damage any electricity cable!