Powerfix Z25679A/Z25679B - Manual (Page 5)

5 GB
Assembly / Cleaning and Care / Disposal
j Wait 2 hours before continuing with assembly.
j Remove the cover 1 from the fixing rail 2
(see Fig. C).
j Remove the protective film from the adhesive
strip on the back of the fixing rail 2 and stick
the hook tape 4 onto the back of the fixing
rail 2 (see Fig. J).
j Mount the fixing rail 2 using the hook and
loop fastening system (see Fig. K and L).
j Measure the height of your door using a tape
measure (see Fig. F).
Note: The product is suitable for doors with a
maximum height of 220 cm.
j Remove the protective film from the adhesive
strip on the front of the fixing rail 2 .
j Stick the fly screen panels 3 onto the adhesive
strip on the fixing rail 2 (see Fig. F).
Note: Take care that the fly screen panels 3
overlap by at least 10 cm.
Note: Take care that the fly screen panels 3
end at floor level. Any excess fly screen should
protrude at the top.
j Cut off any excess fly screen (see Fig. G).
Note: Always cut off excess fly screen at the
top - never at the bottom. The fly screen panels
3 may otherwise fray.
j Place the cover 1 on the fixing rail 2 (see
Fig. H).
j Remove and/or attach the product as shown in
Figures K and L as required.
Q
Cleaning and Care
j Clean the cover 1 with a non-fluffing, damp-
ened cloth.
j Use a mild cleaning agent where necessary.
j Do not under any circumstances use corrosive
or abrasive cleaning agents.
Q Cleaning the fly screen panels
We recommend that you clean the fly screen panels
3 regularly.
Proceed as follows:
j Remove the cover 1 from the fixing rail 2
(see Fig. H).
j Then carefully detach the fly screen panels 3
from the adhesive strip on the fixing rail 2 .
j Wash the fly screen panels 3 by hand. If nec-
essary use a mild detergent.
CaUTION! The fly screen panels 3 are not
suitable for machine washing.
Note: Allow the fly screen panels 3 to dry
out thoroughly before reinstalling them.
j Attach the fly screen panels 3 to the adhesive
strip on the fixing rail 2 (see Fig. F).
Note: Take care that the fly screen panels 3
overlap by at least 10 cm.
j Place the cover 1 on the fixing rail 2 (see
Fig. H).
Q
Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
Product description:
Bug Screen for Doors
Model No.: Z25679A / Z25679B
Version:
01 / 2010