Ericsson R300Z - Manual (Page 54)

Not for Commercial Use - Ericsson Inc.
Some menus/features are operator dependent.
Handling Multiple Calls 47
Note! Depending on whether a call is ongoing or not, the menus C ALL
I NFO and O NGOING C ALL will replace each other.
The Call Waiting Service
If you wish to be able to receive a second call while another call is in
progress, you must turn on the Call Waiting service.
The Call Waiting service may not be available on all networks. If you
are engaged in a fax or a data call, you will not hear any incoming
calls. Incoming calls are rejected.
Receiving a Second Call
If the Call Waiting service is on, you hear a tone in the earpiece if you
receive a second call. The number or name of the caller is normally
shown at the top of the display together with a list of the alternatives
Answer, Busy and Release & Answer. If the incoming call is a restricted
number, the display shows Private.
Note! You may also receive a third call. You must disconnect one of the
calls or create a conference call before you can answer the third call.
See “Conference Calling” on the following page.
Handling Multiple Calls
Activate Call Waiting S ETTINGS > Y E S > Call Options > Y E S >
Call Waiting > Y E S > Activate > Y E S .
Cancel Call Waiting S ETTINGS > Y E S > Call Options > Y E S >
Call Waiting > Y E S > Cancel > Y E S .
Check Status S ETTINGS > Y E S > Call Options > Y E S >
Call Waiting > Y E S > Get Status > Y E S .
Put Current Call on
Hold to Answer
Waiting Call Press Y E S . Your held call is marked in
grey in the display and the
active call is marked in
black.
Reject Waiting Call Select Busy. If the caller’s network
supports it, the caller hears
a busy tone.
If Forward When Busy is
on, the waiting call is
forwarded to the number
you have specified.
End Current Call
and Answer Waiting
Call Select Release
& Answer. You will now be connected
to the second caller.