Edge Products ES3528-WDM - Manual (Page 52)

Configuring the Switch
3-4
3
Main Menu
Using the onboard web agent, you can define system parameters, manage and
control the switch, and all its ports, or monitor network conditions. The following
table briefly describes the selections available from this program.
Table 3-2 Switch Main Menu
Menu Description Page
System 4-1
System Information Provides basic system description, including contact information 4-1
System Mode Configures the switch to operate in normal mode or QinQ
tunneling mode
4-3
System MTU Sets the maximum transfer unit for traffic crossing the switch 4-4
Switch Information Shows the number of ports, hardware/firmware version
numbers, and power status
4-6
Bridge Extension Shows the bridge extension parameters 4-7
IP Configuration Sets the IP address for management access 4-8
Jumbo Frames Enables support for jumbo frames 4-5
File Management 4-11
Copy Operation Allows the transfer and copying files 4-12
Delete Allows deletion of files from the flash memory 4-12
Set Startup Sets the startup file 4-12
Line 4-16
Console Sets console port connection parameters 4-16
Telnet Sets Telnet connection parameters 4-18
Log 4-20
Logs Sends error messages to a logging process 4-23
System Logs Stores and displays error messages 4-20
Remote Logs Configures the logging of messages to a remote logging process 4-21
SMTP Sends an SMTP client message to a participating server 4-23
Reset Restarts the switch 4-25
SNTP 4-26
Configuration Configures SNTP client settings, including a specified list of
servers
4-26
Clock Time Zone Sets the local time zone for the system clock 4-27
SNMP 5-1
Configuration Configures community strings and related trap functions 5-3
Agent Status Enables or disables SNMP 5-2