beautypg.com

Table 9-2, Lacp internal configuration information – Edge Products ES3528-WDM User Manual

Page 156

background image

Port Configuration

9-14

9

Displaying LACP Settings and Status for the Local Side

You can display configuration settings and the operational state for the local side of
an link aggregation.

Table 9-2 LACP Internal Configuration Information

Field

Description

Oper Key

Current operational value of the key for the aggregation port.

Admin Key

Current administrative value of the key for the aggregation port.

LACPDUs Internal

Number of seconds before invalidating received LACPDU information.

LACP System Priority LACP system priority assigned to this port channel.

LACP Port Priority

LACP port priority assigned to this interface within the channel group.

Admin State,
Oper State

Administrative or operational values of the actor’s state parameters:
• Expired – The actor’s receive machine is in the expired state;
• Defaulted – The actor’s receive machine is using defaulted operational partner

information, administratively configured for the partner.

• Distributing – If false, distribution of outgoing frames on this link is disabled; i.e.,

distribution is currently disabled and is not expected to be enabled in the absence

of administrative changes or changes in received protocol information.

• Collecting – Collection of incoming frames on this link is enabled; i.e., collection

is currently enabled and is not expected to be disabled in the absence of

administrative changes or changes in received protocol information.

• Synchronization – The System considers this link to be IN_SYNC; i.e., it has

been allocated to the correct Link Aggregation Group, the group has been

associated with a compatible Aggregator, and the identity of the Link Aggregation

Group is consistent with the System ID and operational Key information

transmitted.

• Aggregation – The system considers this link to be aggregatable; i.e., a potential

candidate for aggregation.

• Long timeout – Periodic transmission of LACPDUs uses a slow transmission rate.
• LACP-Activity – Activity control value with regard to this link.

(0: Passive; 1: Active)

This manual is related to the following products: