Parity, Speed, Parity 19-25 speed 19-25 – Edge Products ES3528-WDM User Manual
Page 303

Line Commands
19-25
19
Example
To specify 7 data bits, enter this command:
Related Commands
parity
This command defines the generation of a parity bit. Use the no form to restore the
default setting.
Syntax
parity {none | even | odd}
no parity
• none - No parity
• even - Even parity
• odd - Odd parity
Default Setting
No parity
Command Mode
Line Configuration
Command Usage
Communication protocols provided by devices such as terminals and modems
often require a specific parity bit setting.
Example
To specify no parity, enter this command:
speed
This command sets the terminal line’s baud rate. This command sets both the
transmit (to terminal) and receive (from terminal) speeds. Use the no form to restore
the default setting.
Syntax
speed bps
no speed
bps - Baud rate in bits per second.
(Options: 9600, 19200, 38400, 57600, 115200 bps, or auto)
Console(config-line)#databits 7
Console(config-line)#
Console(config-line)#parity none
Console(config-line)#