Installation, 1 battery removal and installation – Sealey VS8196 User Manual
Page 7
Page 7
Original Language Version
VS8196.V2 Issue:2(P)-20/08/13
3. Installation
3.1 Battery Removal and Installation
NOTE:
If the power indicator light is blinking continuously, this reminds
you to replace batteries in time as instructed.
Fig. 4
1) Turn the handheld display unit upside down to expose the battery
compartment cap. (Fig.4)
2) Slide the catch in and remove the battery compartment cap.
Fig. 5
Pull out the battery holder and remove batteries. (Fig.5)
To install new batteries, insert four (4) new AA batteries into the slots
in the battery holder.
4)
Battery orientation is indicated in the battery holder.
5) Replace the battery holder and compartment cap.
3. Installation
See also other documents in the category Sealey Tools:
- GSA6000 (4 pages)
- VS710 (2 pages)
- VS392 (2 pages)
- SA615 (4 pages)
- VS726 (2 pages)
- SM14 (3 pages)
- VS392 (2 pages)
- VS7021 (3 pages)
- VS726 (2 pages)
- VS726 (2 pages)
- SA661 (4 pages)
- VS726 (4 pages)
- VS7021 (2 pages)
- SM14 (4 pages)
- VS392 (2 pages)
- VS726 (2 pages)
- SA53 (2 pages)
- SA695 (4 pages)
- ATB1530 (1 page)
- SA651 (3 pages)
- SA919 (1 page)
- GSA25 (4 pages)
- SA673 (4 pages)
- SA650 (4 pages)
- SA58 (4 pages)
- SA653 (4 pages)
- GSA671 (4 pages)
- S01004 (4 pages)
- SA6005 (4 pages)
- SA231 (4 pages)
- SA58 (4 pages)
- SA656 (4 pages)
- SA654 (3 pages)
- SA12/S (3 pages)
- SA613 (4 pages)
- SA120 (2 pages)
- SA14 (4 pages)
- SA151 (4 pages)
- SA43 (4 pages)
- SA241 (4 pages)
- SA152 (4 pages)
- SA44 (3 pages)
- SA96 (2 pages)
- SA37/94 (4 pages)
- SA37/94 (3 pages)