Sealey VS8196 - Manual (Page 2)

Page 2 Original Language Version VS8196 Issue:2(P)-20/08/13
6. Warranty Information
.....................................................................12
6.1 Service Procedures
..................................................................12
7. Environmental protection
............................................................ 13
8. Declaration of Conformity
.......................................................... 14
1. Safety Instructions
IMPORTANT: Failure to understand and follow the instructions listed
below may result in electric shock, fire and/or serious personal injury.
1.1 Work Area Safety
• Always perform automotive testing in a safe environment.
• Keep your work area clean and well lit. Cluttered benches and dark areas
may cause accidents.
• Keep clothing, hair, hands, tools, test equipment, etc. away from all
moving or hot engine parts.
• Operate the tool in a well-ventilated work area.
• DO NOT operate the tool in explosive atmospheres, such as in the
presence of flammable liquids, gases, or heavy dust.
• Keep a fire extinguisher suitable for gasoline/chemical/electrical fires
nearby.
• DO NOT use the tool around corrosive chemicals which can damage the
tool.
• DO NOT abuse the cable. Never use the cable to carry the tool.
• Keep bystanders, children and visitors away while operating the tool.
• Keep the tool dry, clean, free from oil, water and grease. Use a mild
detergent on a clean cloth to clean the outside of the tool when necessary.
1.2 Electrical Safety
• Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators.
• DO NOT expose the tool to rain or wet conditions. Water entering the
tool will increase the risk of electric shock.
• DO NOT abuse the cable. Never use the cable for carrying, pulling,
or unplugging the tool. Keep cable away from heat, oil, sharp edges or
moving parts.
1. Safety Instructions