Sealey VS8196 - Manual (Page 10)

Page 10 Original Language Version VS8196 Issue:2(P)-20/08/13
4.2 Operation Precautions
CAUTION: Do not insert the tool into anything or anywhere that may contain a
live electrical charge.
y DO NOT operate the tool unless the user’s manual has been read thoroughly
and proper training has been completed.
y DO NOT immerse the handheld display unit in water. Reduce the risk of
electric shock and damage.
y DO NOT use the tool if condensation forms inside the imager head. Let the
water evaporate before using again.
y DO NOT use excessive force to insert or withdraw the cable.
y DO NOT use the imager head and cable to modify surroundings, clear
pathways or clogged areas.
y The handheld display unit is not waterproof. The imager head and its cover
are waterproof, but not acid-proof or fireproof. Avoid submersing the imager
head into corrosive, oily places and be sure to keep the imager head away
from high temperature objects.
y DO NOT put the imager head and cable into anything or anywhere that may
contain a live electrical charge.
y Store idle components out of the reach of children and other untrained
persons.
y Maintain the tool with care. Properly maintained tools are less likely to cause
injury.
y If the tool is dropped, check for the breakage and any other conditions that
may affect its operation.
y manufacturer of the tool.
y Dry your hands when operating the tool or replacing batteries.
y Protect against excessive heat. The tool should be kept away from heat
sources such as radiators, stoves or others that produce heat.
y Store the tool in ventilated and dry places.