Sealey VS8196 - Manual (Page 12)

Page 12 Original Language Version VS8196 Issue:2(P)-20/08/13
5. Troubleshooting
SYMPTOMS
POSSIBLE
REASONS
SOLUTIONS
Display unit is on, but does
not show image.
Cable connection is
loose.
Check and reattach.
Imager head is dirty. Clean imager head.
LEDs on imager head are dim
at max brightness, display
changes between black/white
and color, display turns itself
OFF after a short period.
Batteries are low. Replace batteries.
The tool will not turn on. Dead batteries. Replace batteries.
6. Limited One Year Warranty
Sealey warrants to its customers that this product will be free from all defects in
materials and workmanship for a period of one (1) year from the date of the original
purchase, subject to the following terms and conditions:
1) The sole responsibility of Sealey under the Warranty is limited to either the
repair or, at the option of Sealey, replacement of the tool at no charge with
Proof of Purchase. The sales receipt may be used for this purpose.
2) This warranty does not apply to damages caused by improper use, accident,
flood, lightning, or if the product was altered or repaired by anyone other than
the Manufacturer’s Service Centre.
3) Sealey shall not be liable for any incidental or consequential damages arising
from the use, misuse, of the tool.
4) All information in this manual is based on the latest information available at the
time of publication and no warranty can be made for its accuracy or
completeness. Sealey reserves the right to make changes at any time without
notice.
6.1 Service Procedures
If you have any questions, please contact your local store, distributor or visit our
website at www.sealey.co.uk.
If it becomes necessary to return the tool for repair, contact your local
distributor for more information.
5. Troubleshooting
6. Warranty Information