beautypg.com

Sealey TA090 User Manual

Page 15

background image

In the MENU system, you can find the following functions:

Delete current data: If you find the last measurement reading is wrong, you can delete it via this

function. At the same time, the statistics will be updated.

Delete all data: You can delete all data and statistics of the Current Work Mode.

Delete Group data: This function includes “Delete all data” function. In addition, this function will

delete High alarm, Low alarm, and One & Two point calibrations.

All measuring readings of all work modes can be downloaded to PC via USB port for data analysis.

See software guide for more details.

The following list of error messages explains how to identify and eliminate faults.

Err1, Err2, Err3: Connecting of probe fault; Deviant signal

Err1: Eddy current probe

Err2: magnetic induction probe

Err3: both probes

Err4, 5, 6: reserved

Err7: Thickness fault.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

[email protected]

Sole UK Distributor, Sealey Group,

Kempson Way, Suffolk Business Park

,

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Web

email

17. DELETE FUNCTIONS

18. GAUGE CONTROL VIA PC

19. TROUBLE SHOOTING

Original Language Version

TA090 Issue No.1 25/10/12

© Jack Sealey Limited

BATTERY DISPOSAL / REPLACEMENT INFORMATION

See Section 11.2 regarding battery access/ replacement.

Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to

inform potential purchasers of products containing batteries (as defined within these regulations),

that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd’s Batteries

Producer Registration Number (BPRN) is BPRN00705