Edirol R-09HR - Manual (Page 99)

99
R-09HR configuration settings
When using batteries with the R-09HR, set Battery according to the type of battery being
used.
If the wrong type is set, the remaining battery power will not be shown correctly.
fig.powermanagement-e.eps_80
1.
Select “Power Manage” from the
Use the [PLAY Button ] and [STOP Button ] to select
“Power Manage,” then press the [REC Button].
fig.batterytype-e.eps_80
2.
Select “Battery.”
Use the [PLAY Button ] and [STOP Button ] to move
the cursor to the Battery line.
fig.setbatterytype-e.eps_80
3.
Set the battery type.
Use the [PREV button ] and [NEXT button ] to set the
battery type by changing the setting for Battery.
• “Cautions when using batteries with the R-09HR” (p. 22)
• “Power saving feature” (p. 22)
• “Remaining battery power indication” (p. 22)
When finished with the settings, press the [MENU button] to return
to previous screens, in order.
Setting the battery type (Battery)
Setting
ALKALINE
Ni-MH (nickel metal hydride)
Move the
cursor
up or down
Enter
Move the
cursor
up or down
Change
the value
R-09HR_e.book 99 ページ ２００７年１２月１７日 月曜日 午後２時１６分