beautypg.com
83
R-09HR configuration settings
Various R-09HR settings, such as recording and playback settings and date and time settings, are done from the
List of Settings
Category
Menu/Effect
Value
(Default value in bold)
Procedure
Recorder
Setup
Sample Rate
Rate Sets the sampling frequency when recording.
44.1
/48.0/88.2/96.0
p. 84
Rec Mode
Sets the song type (recording mode) when recording.
MP3
64/96/128/
192/224/320
p. 85
WAV
16
/24
File Name
Sets how file names are assigned.
Date/
Name
p. 86
Max File Size
Sets a limit on the file size of the file generated during recording.
64MB/128MB/256MB/
512MB/1GB/
2GB
p. 87
Player
Play Mode
Sets the order songs are played back.
SINGLE/
SEQUENTIAL
/
SHUFFLE
p. 88
Repeat
Sets whether to use repeat playback.
OFF
/ON
p. 89
Preview Monitor
Sets whether sound is played from the monitor speaker.
OFF/
ON
p. 90
Speed
Sets the playback speed when the [SPEED Button] is pressed.
50%, 60%,
70%
, 80%,
90%, 110%, 120%,
130%, 140%, 150%
p. 91
Rev Type
Selects the reverb type.
HALL1
/HALL2/ROOM/
PLATE
p. 92
Rev Depth
Sets the depth for the reverb
1–
10
p. 93
Display
Brightness
Adjusts the display brightness.
5
–10
p. 94
Peak Hold
Sets peak hold for the Level Meter.
p. 95
Display Timer
Sets the time to wait for some input before darkening the screen. OFF/2/
/10/20
p. 96
Rec/Peak LED
The [REC Indicator] and [PEAK Indicator] can be linked to the
Display Timer settings. When the display goes dark, the [REC
Indicator] and [PEAK Indicator] also turn off.
Normal
/Power Save
p. 97
Power
Manage
Auto Power Off
Sets the time to wait for input before turning off the power.
OFF/3/5/10/15/
30
45/60
p. 98
Battery
Sets the battery type used.
ALKALINE
/Ni-MH
p. 99
Input
Rec Monitor Sw
Turn on when monitoring the input sound with headphones during
recording. Turn off when not monitoring.
p. 100
EXT Mic Type
Changes the type of the microphone connected to the microphone
jack.
MONO/
STEREO
p. 101
Limiter/AGC
Sets the function of the LIMITER/AGC switch.
Limiter
/AGC
p. 102
Low Cut Freq
Sets the frequency to apply Low Cut
100 Hz/
200 Hz
/400 Hz p. 103
Remote Control
Sets whether to accept remote control operations.
Disable/
Enable
p. 104
Date &
Time
—
Sets the date and time.
p. 105
R-09HR_e.book 83 ページ ２００７年１２月１７日 月曜日 午後２時１６分
