Edirol R-09HR - Manual (Page 23)

23
Using the R-09HR
Install a coin-type lithium battery (included) in the remote control.
fig.remote01-e.eps
1.
Pull out the battery holder.
2.
Insert a lithium battery (CR2025) as shown in the illustration.
3.
Replace the battery holder.
Push it inward until it clicks into place.
Use only the specified type (CR2025) of lithium battery. Be sure to insert it as directed to
ensure correct polarity.
Installing batteries in the remote control
Back side of the
remote control
1
2
Battery holder
Press here in the direction of the
arrow while you pull out the holder. Batteries to use:
Lithium battery
(CR2025)
R-09HR_e.book 23 ページ ２００７年１２月１７日 月曜日 午後２時１６分