Edirol R-09HR - Manual (Page 93)

93
R-09HR configuration settings
Sets the depth for the reverb when applying reverb to playback.
fig.plaersetting-e.eps_80
1.
Select “Player Setup” from the [Menu
Screen].
Use the [PLAY Button ] and [STOP Button ] to select
“Player Setup,” and then press the [REC Button].
fig.revtype-e.eps_80
2.
Select “Rev Depth.”
Use the [PLAY Button ] and [STOP Button ] to move
the cursor to the Rev Depth line.
fig.revtype-set-e.eps_80
3.
Set the reverb depth.
Use the [PREV Button ] and [NEXT Button ] to change
the Rev Depth value.
Larger values have deeper reverb.
• When finished with the settings, press the [MENU button] to
return to the previous screens, in order.
• Reverb cannot be be applied when playing a song with a
sampling frequency of 88.2 kHz or 96 kHz.
Setting the reverb depth (Rev Depth)
Setting 1- 10
Move the
cursor
up or down
Enter
Move the
cursor
up or down
Change
the value
R-09HR_e.book 93 ページ ２００７年１２月１７日 月曜日 午後２時１６分