Selecting the radio mode, Tuning to a channel – Eclipse - Fujitsu Ten CD5415 User Manual
Page 74
74
How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only)
Press the [FM AM] button for more than two seconds.
1
The mode switches between satellite radio mode and FM/AM
radio mode each time the button is pressed.
Selecting the radio mode
Press the [FM AM] button for less than one second to
switch to the desired SR channels.
1
Radio bands will switch from SR1
➔ SR2 ➔ SR3 ➔ SR4 in
order each time the button is pressed.
Turn the [SEL] button to the left or right to tune to a
channel.
2
Turn to the right: Tunes to higher channels.
Turn to the left: Tunes to lower channels.
Press the [
] or [
] button for less than one second to
start the automatic channel search.
3
Reception is enabled for all channels within the currently
selected category.
(Refer to page 75 for details on “Category selection”.)
[
] button: Starts searching toward higher channels.
[
] button: Starts searching toward lower channels.
Tuning to a channel
[SEL] button
[
] button
[FM AM] button
[
] button