Eclipse - Fujitsu Ten CD5415 - Manual (Page 31)

31
Basic operation
A variety of settings can be changed.
The function mode is activated.
Setting items will be displayed in the following order when the
[SEL] button is turned to the right.
Making changes with Function Mode
Press the [DISP FUNC] button for more than one
second. 1
Turn the [SEL] button in either direction to display setting
items for selection. 2
The receiver is set at the factory to emit a beep tone in
response to button operation. The guide tone feature may be
disabled in the following procedure:
Disabling the guide tone feature (for button operation)
BEEP CLOCK
[DISP FUNC] button
[RTN]
button
[SEL] button
ATTENTION
If the optional HD RADIO tuner is connected, the
selections will switch in the following order.
BEEP HD RADIO CLOCK
Turn the [SEL] button to select BEEP. 1
Press the [SEL] button. 2
The Guide Tone Mode will be switched ON/OFF.
Turn the [SEL] button to select ON or OFF. 3
Press the [SEL] button to select current setting. 4
Press the [RTN] button. 5
At this time, other adjustments can also be made in
Function Mode.
Press the [DISP FUNC] or [RTN] button to exit
Function Mode. 6