Eclipse - Fujitsu Ten CD5415 - Manual (Page 51)

51
How to operate the tuner
Check that the deck is in standby mode. 1
Press and hold the [FM AM] button, then button [3], and
hold both for more than three seconds. 2
The radio band switches in the order shown below each time
the buttons are pressed.
After this, the broadcast stations will be searched for
automatically and stored in buttons [1] to [6].
Changing the radio band location
The location for the radio bands used between the North America
region and the Asia/Australia/Latin region can be switched. The
default setting is USA (North America).
[FM AM] button
Button [3]
ATTENTION
When an optional HD Radio tuner unit is connected, radio band
location is set to USA. Other radio band locations are
unavailable.(U.S.A. only)
USA ASIA AUS LATIN