Listening to the tuner – Eclipse - Fujitsu Ten CD5415 User Manual
Page 24
24
Basic operation
Listening to the tuner
Press the [FM AM] button.
1
This will turn the tuner on.
Press the [FM AM] button to switch to the desired FM or
AM bands.
2
Radio bands will switch from FM1
➔ FM2 ➔ FM3 ➔ AM in
order each time the button is pressed.
Turn the [SEL] button to the left or right to tune to a
station.
3
Turn to the right: Tunes to higher frequencies.
Turn to the left:
Tunes to lower frequencies.
Press the [
] or [
] button to start the automatic station
search.
4
[
] button:
Starts searching toward higher frequencies.
[
] button:
Starts searching toward lower frequencies
ATTENTION
•If stations have been stored in memory, pressing a button
from [1] to [6] will directly select a station. (Refer to the section
“Manually setting stations into memory” on page 48)
•When an optional HD Radio tuner unit is connected, digital
broadcasts have reception priority. (USA only)
[
] button
[FM AM] button
[
] button
[SEL]
button
Buttons [1] to [6]