Eclipse - Fujitsu Ten CD5415 - Manual (Page 48)

48
How to operate the tuner
Manually setting stations into memory
Press the [FM AM] button for less than one second to
switch between FM and AM. 1
Turn the [SEL] button to the right or left to tune to the
station to be entered in memory.
2
This section covers the setting of stations in memory under the
numbered buttons.
Select any button, from [1] to [6], and press it for more
than two seconds. 3
The tuned station is now memorized and set in the button
selected. Repeat the procedure to set additional manually
tuned stations in memory, in turn, for buttons [1] to [6]. These
buttons are called the preset buttons.
ATTENTION
•Pressing the preset buttons ([1] to [6]) allows you to make one-
touch station selections. The frequency of the selected station
is indicated on the display.
•When a new station is set in memory, the station previously set
in memory will be deleted.
[SEL]
button
[FM AM] button
Buttons [1] to [6]
If the vehicle’s battery is disconnected (for repairs to the vehicle
or for removing the receiver), all stations in memory will be lost.
In such a case, set stations in memory again.
Caution