Eclipse - Fujitsu Ten CD5415 - Manual (Page 3)

3
• When installing equipment do not remove or alter existing
vehicle fasteners, including nuts, bolts, screws, clips, and
fittings. Never detach, move or alter existing vehicle wiring,
including electrical grounds and straps. Alteration of existing
vehicle components may make vehicle unsafe to operate.
• Before installation, remove the negative (-) battery terminal to
prevent shocks, electrical arcing, fires, and damage to vehicle
wiring and the equipment you are installing.
• Secure wiring with tape or plastic ties so that wires do not
interfere with vehicle operation, including brake pedal, gear
shifter and steering. Position wires so that they will not be
rubbed, abraded, or damaged by moving vehicle components,
including power seats.
• To avoid equipment and vehicle damage, including fire, never
supply power to installed equipment in a way which will
overload the capacity of an existing vehicle circuit. Never
leave a power supply wire or connection uninsulated. Always
install supplied fuses, circuit breakers, and relays.
• Air bags are vital safety equipment. Never install equipment in a way
which will alter air bag wiring or interfere with air bag deployment.
Air bags must function properly in the event of an accident.
• When installation is complete, test all vehicle electrical systems
for proper operation, including lights, horn, brake lights, and
emergency flashers.
• For your protection, never use a power drill without safety
glasses or goggles. Debris or broken drill bits may cause
severe eye injuries, including blindness.
• Use electrical tape to insulate the ends of all wires, even if not
used. Proper insulation prevents arcs, shocks and fires.
• Some equipment uses batteries. Never install equipment
where young children can get access to batteries. If a battery
is swallowed, seek medical attention immediately.
• When vehicle is moving, never take your eyes off the road to make
adjustments to the equipment. You must pay attention to the road
to avoid accidents, do not let the operation or adjustment of the
equipment distract you from proper vehicle operation.
• The driver should not look at the screen while driving.
Accidents may result if you are not paying attention to the
forward direction.
• Do not put foreign objects in the loading slot of disc. Fires or
shocks may result.
Warning