Eclipse - Fujitsu Ten CD5415 - Manual (Page 2)

For your safety in using the
CD5415
Warnings and caution signs, illustrated below, are posted
throughout this manual as well as on the CD5415. They show safe
and correct ways to handle the product so as to prevent personal
injury to you, others and to avoid property damage.
Before reading through the manual, take time to read through and
learn the important information listed in this section.
This sign indicates a situation in which
incorrect handling or disregard of this sign
might result in death or serious personal injury.
This sign indicates a situation in which
incorrect handling or disregard of this sign
might result in personal injury or may result
solely in damage to property.
• Do not modify this system for use other than that specified
herein. Also, do not deviate from the installation procedures
described herein; Eclipse will not be held liable for damages
including, but not limited to serious injury, death or property
damage resulting from installations that enable unintended
operation.
• This equipment requires 12V DC and should only be installed in
a vehicle with a 12V negative ground electrical system. Any
other installation may cause a fire or other severe damage to
the equipment and the vehicle.
• Never install this equipment where it will interfere with safe
operation of the vehicle. Never block the driver's view. Do not
install equipment where it may interfere with operation of the
brakes, the steering or any safety equipment, including seat
belts and air bags.
• Before drilling holes in a vehicle for installation, you must
confirm the locations of pipes, tanks, electrical wiring, and
other vehicle systems and components to ensure that there will
be no interference or contact. In addition, you must also apply
rust prevention and leak prevention measures at the drilling
area. Otherwise, fire or electric shock could occur.
Warning
Caution
Warning
2