Eclipse - Fujitsu Ten CD5415 - Manual (Page 68)

68
How to operate the tuner with an optional HD RADIO tuner connected (U.S.A. only)
Press the [FM AM] button for less than one second to
switch to the desired FM or AM bands.
Radio bands will switch from FM1
➔ FM2 ➔ FM3 ➔ AM in
order each time the button is pressed.
1
ATTENTION
If the optional SIRIUS satellite radio tuner unit is connected, radio
mode will be switched between the satellite radio mode and FM
AM radio mode by pressing the [FM AM] button for more than
one second.
Press the [SEL] button for more than two seconds until a
beep is heard.
The automatic preset mode starts.
The [ASM ON] indicator on the screen flashes, and stations
are automatically entered in memory under buttons [1] to [6].
These buttons are called preset buttons.
2
ATTENTION
•When a new station is set in memory, the station previously set
in memory will be deleted.
•If there are fewer than six receivable stations, the stations set in
the remaining buttons will be retained.
Entering stations into memory automatically
(The automatic preset mode: ASM)
[SEL] button [FM AM] button
Buttons [1] to [6]