F8 clock default tempo, P. 91 – Edirol PC-80 User Manual
Page 91
91
System settings for the PC-80
fig.util*
1
Simultaneously press the
MIDI CH
button and
PGM CHANGE
button,
and hold them down for a few moments.
The PC-80’s display will indicate “UTL,” and you will be in Utility mode.
fig.sy0
2
Press the
[SYSTEM]
key on the keyboard.
“SY0” appears (blinking) in the display.
3
Use the
VALUE
encoder or the
[1]
key of the keyboard to choose “
SY1
.”
fig.enter
4
Press the
ENTER
button.
* If you press any other button without pressing the ENTER button, the setting will be
cancelled.
5
Use the
VALUE
encoder or press one of the
[0]
–
[9]
keys of the keyboard to set the F8 Clock
Default Tempo to a value in the 20–250 range.
The display will indicate the value you specified.
6
Press the
ENTER
button.
F8 CLOCK DEFAULT TEMPO
PC-80_e.book 91 ページ ２００５年１１月１０日 木曜日 午前１１時３４分