Edirol PC-80 - Manual (Page 29)

29
Installation and settings (Macintosh)
In order to use the PC-80, you’ll need to install both the driver and the PC-80
software synthesizer.
When you use the following procedure to install the software, both the driver
and the PC-80 software synthesizer will be installed in your Macintosh.
If the “Authenticate” dialog box appears during the installation, input
the password and click “OK.”
1
Log on as the user who will be using the PC-80.
2
Disconnect all USB cables other than those for your keyboard and mouse,
and restart your Macintosh.
3
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
4
In the Driver folder of the CD-ROM, double-click PC80USBDriver.pkg .
* A message such as “This Installer package needs to...” may appear.
Click “Continue.”
5
The display will indicate “Welcome to the EDIROL PC-80 Driver
Installer.” Click [Continue] .
6
The display will indicate “Select a Destination.”
Click the drive in which the operating system is installed to select it, and then
click
[Continue] .
7
The display will indicate “Easy Install.”
Click [Install] or [Upgrade] .
8
The display will indicate “Installing this software requires you to restart
your computer when the installation is done.”
Click [Continue Installation] .
9
The display will indicate “The software was successfully installed.”
Click [Restart] to restart your computer.
Installing
If you will be using the PC-
80 as a different user, you
must log in as that user
and reinstall the software.
What you actually see on
your computer screen may
be different, depending on
your computing
environment and the
operating system you’re
using.
Select your startup disk as
the drive.
This completes installation of the PC-80 driver and the PC-80 software
synthesizer.
Now, let’s try starting up the PC-80 software synthesizer.
(
➔“Starting up the PC-80 software synthesizer” (p. 30))
PC-80_e.book 29 ページ ２００５年１１月１０日 木曜日 午前１１時３４分