Edirol PC-80 - Manual (Page 40)

40
Playing the PC-80 keyboard
You can edit a parameter either by using the PC-80’s VALUE encoder or by
using the Synth panel.
If you use the Edit screen of the Synth panel, you’ll be able to edit a variety of
parameters to modify the sound.
■
Using the PC-80’s VALUE encoder to edit the sound
If you assign a specific parameter to the PC-80’s VALUE encoder, you can
control that PC-80 parameter while editing or while playing.
1
Click the [Normal/Edit screen
select] button to switch to the Edit
screen.
2
Press the PC-80’s MIDI CH button to
turn it on (lit).
3
In the Synth panel, right-click the
parameter that you want to control.
(For Macintosh, hold down the
Control key and click.)
4
From the menu that appears, choose
“Assign.”
5
Operate the PC-80’s VALUE
encoder .
The value of the assigned parameter
will change.
You will hear the edited sound when you play the keyboard.
Editing the sound
[Normal/Edit screen select] button
Right-click
PC-80_e.book 40 ページ ２００５年１１月１０日 木曜日 午前１１時３４分