Edirol PC-80 User Manual

Page 19

Installation and settings (Windows)

The

Completing the Found New Hardware Wizard

dialog box will appear.

Click

[Finish]

In the

Driver Setup

dialog box, click

[Close]

This completes driver installation.

Next, in order to ensure that audio and MIDI processing occurs smoothly,
you need to make settings so that Background Services is given priority.
(

➔

If the “Driver Signing Options” setting is other than “Ignore,” a dialog box like the
following will appear.

If a dialog box with an “!” mark appears

1. Click [Continue Anyway].

2. Installation will begin.

If the Change System
Settings dialog box
appears, click [Yes].
Windows will restart
automatically.

If you changed the “Driver Signing Options” setting (step 4 on p. 16), restore the
original settings after Windows has restarted.

1. Log onto Windows as the user who installed the driver.

2. From the Windows start menu, choose Control Panel.

3. In “Pick a category,” click Performance and Maintenance.

4. In “or pick a Control Panel icon,” click the System icon. The

System Properties

dialog box will appears.

* Depending on your system, the System icon may appear directly in the

Control Panel

(Classic view). If so, double-click the System icon.

5. Click the Hardware tab, then click [Driver Signing].

The Driver Signing Options dialog box will appears.

6. In the Driver Signing Options dialog box, restore the original

setting (“Warn” or “Block”) and click [OK].

7. Click [OK]. The System Properties dialog box will closes.

PC-80_e.book 19 ページ２００５年１１月１０日　木曜日　午前１１時３４分